Houseplant Potting Mixes: How to Choose, Make and Improve Them
Two plants can sit in identical nursery pots and need surprisingly different compost. A prayer plant may struggle if its fine roots dry too quickly, while a mature climbing Monstera may be happier in a mix with room for air between the particles. And sometimes the problem is neither the plant nor the recipe: water might be running around a dry root ball instead of soaking into it.
You do not need a cupboard full of ingredients to get this right. A good prepared houseplant compost is often enough. This guide helps you choose a starting mix, decide whether it needs adjusting, understand what the ingredients actually change and make five practical blends. It also shows you when to leave a healthy plant alone—and how to investigate a potting mix that is no longer working.
Which potting mix suits your houseplant?
Start with how the roots grow and how steadily the plant needs moisture. Labels such as houseplant, aroid and cactus are useful starting points. The right choice also depends on the roots, the pot and the conditions in your home. This table shows sensible starting mixes for common indoor plants.
| Plant and examples | A sensible starting mix | What matters most |
|---|---|---|
| Everyday foliage — Ficus, Dracaena, spider plants, many palms | Complete houseplant potting compost | Even wetting and enough structure to last between repottings |
| Large or top-heavy specimens — mature Ficus, some palms, indoor citrus | Stable prepared compost, sometimes a formulated loam-based type | Keeps large plants steady while holding moisture around their roots |
| Prayer plants, many Begonia, terrestrial ferns, African violets | Fine-to-medium, moisture-holding but aerated compost | Moisture around finer roots without lasting saturation |
| Established climbing aroids — many Monstera, Philodendron, Epipremnum | Prepared compost with suitably graded bark and mineral particles | Roots can absorb water while air moves through the mix |
| Many Hoya and other epiphytic foliage plants | Open, structured mix that still holds some moisture | Roots can wet properly without staying saturated |
| Desert cacti and arid succulents — Echeveria, Haworthia, Crassula | Appropriate gritty cactus or succulent compost | Predictable drying for the species and season |
| Forest cacti — Schlumbergera, Rhipsalis, Epiphyllum | Open mix with more moisture retention than typical desert-cactus compost | Air around roots without drying too abruptly |
| Common epiphytic orchids, including Phalaenopsis | Bark-based orchid medium in a suitable grade | Air around thicker roots and dependable rewetting |
| Non-succulent stem cuttings | Fine, airy propagation compost | Close contact and steady moisture while roots form |
A well-established Monstera growing up a support can use a fairly open mixture, especially when its roots are substantial. A young Alocasia or Spathiphyllum may prefer a finer, evenly moist mix. Anthurium varies too: a coarse blend for a mature specimen may leave gaps around a small plant’s roots.
An epiphyte grows on another plant for support, but its roots may still sit among moist bark, moss and leaf litter. A bird's-nest fern, for example, grows above the forest floor and collects damp leaf litter among its leaves. That moisture-holding material helps explain why epiphytic plants can need very different potting mixes.
Carnivorous plants often need low-nutrient compost, bonsai use specialised particles and watering routines, and reservoir-fed mineral systems are managed differently from ordinary potting compost. For the last of these, see the semi-hydro growing media guide.
If a plant is healthy and its existing compost wets evenly, drains appropriately and supports good root growth, leave it undisturbed until there is a reason to repot. This is especially helpful for a newly arrived plant that is still adjusting to changes in light, temperature and transport.
Should you buy a ready-made mix or make your own?
For most indoor plants, start by looking for a good, ready-to-use potting compost. It has already been combined for container growing and may contain the structure, moisture-holding ingredients and starter nutrients your plant needs. If you have only a few plants, this is usually simpler than buying separate bags of bark, grit and perlite.
Mixing your own makes more sense when you have a particular problem to solve. Perhaps your mature Philodendron stays wet too long in a fine compost, or you keep several orchids and want a consistent bark size. Making a blend gives you control over texture, and often one modest adjustment is enough.
Browse ready-made potting mixes and individual ingredients in our Soil & Substrates collection.
Read the bag before adding anything
The most important distinction is between a complete growing medium and an ingredient. A bag of prepared houseplant compost may contain a balanced combination of organic material, structural additions, added fertiliser for early growth, ingredients that adjust its acidity, and a wetting agent. A brick of compressed coir or a bag of orchid bark provides just one component. Plain coir needs its own nutrient supply when used as a main growing medium.
Check the texture as well as the name. Coir pith is fine and water-retentive; coir chips are larger and make a different sort of mixture. Finely composted bark behaves differently from medium orchid bark. A product sold as a mixing kit may arrive as separate ingredients for you to measure and combine. Check whether you are buying a finished compost or a kit, and follow the preparation instructions, especially for compressed products.
You will also see both soilless composts and formulated loam-based composts. Loam-based potting composts are made for containers and are heavier, making them useful for larger plants that need a stable base. They can also help keep moisture and nutrients available more steadily. Garden soil taken straight from the ground can settle densely in a pot, wet unevenly or introduce unwanted organisms.
Peat-free options are worth considering because peat extraction damages habitats that store carbon. Bark, coir, wood fibre, composted materials and minerals can all take the place of peat in different blends, but they also differ in processing, sourcing and transport. A peat-free label describes the ingredients. The product's overall environmental impact and growing performance also depend on its sourcing, processing and formulation. Choose a reliable mix that suits the plant and add ingredients only when they serve a purpose.
For more detail on individual materials, see our houseplant substrate guide.

How a good potting mix works
Picture what happens when you water a pot thoroughly. Some water travels downwards and leaves through the drainage holes. Some stays behind, held within the materials and in the small spaces between them. As the plant uses that water, air can return to spaces that have emptied. Roots need both: moisture they can reach and oxygen that can move through the surrounding medium.
A draining pot can still have an unhealthy root zone. The surface may look dry while deeper compost remains soaked. If too few spaces refill with air, roots may struggle to take up water and nutrients even while the pot feels wet. Visible runoff tells you that water has left the container, not how much air remains around the roots.
What the texture changes
Compare fine compost with a handful of medium bark. The finer material often holds more water in small spaces; suitably sized coarse pieces can leave larger openings. But the finished mixture matters more than any ingredient on its own: enough fine material can settle into the gaps between large pieces, leaving a bark-heavy blend surprisingly dense.
Roots also need contact with moisture. Thick orchid roots can grow between pieces of bark, while a newly rooted cutting in those same chunks may have very little damp material touching its new roots. A climbing aroid can grip its support and send thicker roots through the pot; a small terrestrial tropical plant may have much finer roots. Choose a texture that makes good contact with your plant's current roots.
The mix must hold the plant upright, too. A heavy crown or tall supported vine places different demands on its potting medium from a small cutting. For a top-heavy specimen, a suitable heavier formulated compost and a stable container may be more helpful than the lightest possible blend.
Why a good mix in one pot can behave badly in another
The container changes the result. A small root system in an oversized pot cannot use much of the surrounding water, so that compost may stay wet for an extended period. Pot height also matters. Fine compost can stay wetter near the bottom, even after excess water drains away. This is especially noticeable in shallow pots.
A gravel layer at the bottom can change how water is held in a pot, depending on the materials used. It has no established general benefit for houseplant root health. For a pot that stays wet, start with a suitable mix, a container sized for its roots and drainage holes; empty any water collected in the outer pot. The drainage and aeration guide explains why water leaving a pot and air reaching its roots are different things.
Pot material matters as well. Unglazed terracotta allows some water to evaporate through its walls. Plastic and glazed pots generally lose less moisture through the pot itself. Notice how quickly the compost dries in your particular pot.
Then there is the room itself. A Ficus near a bright window in active growth may use water much faster than the same plant on a cool winter shelf. Lower light and temperature generally mean slower water use, even if the compost recipe is unchanged. Humidity and airflow also influence drying. Before changing ingredients, check whether a shift in growing conditions is the real reason a previously reliable mix now stays wet or dries too quickly.
What the main substrate ingredients do
Start with the change your plant needs. If the compost stays too wet for your plant in its usual conditions, a more open mix may help; a top-heavy plant may need extra weight and support. Ingredients have different jobs, and their effect depends on how they work together in the finished mix. The table shows what each one contributes.
| Ingredient | Main job in a mix | What to check |
|---|---|---|
| Complete houseplant potting compost | Ready-formulated base with moisture retention, structure and often starter nutrients | It may need no further ingredients |
| Peat or fine coir pith | Holds moisture in a fine-textured base | How dried material rewets; whether coir is washed or buffered |
| Coir chips and fibres | Adds coarser organic texture while retaining some moisture | Larger pieces behave differently from fine pith |
| Orchid or pine bark | Creates more open structure for suitable established roots | Grade and condition of the bark |
| Perlite | Lightweight particles that can help open a mix | Size, dust and fragility |
| Pumice, lava rock, horticultural grit | Adds mineral structure, often with more weight | Size, cleanliness and water-holding differences |
| Sphagnum moss or vermiculite | Adjusts moisture retention in selected recipes | Both behave differently from perlite |

Start with a suitable moisture-holding base
A prepared peat-free houseplant compost may already blend coir, bark, wood fibre and composted materials. Some mixes stay loose and springy after watering; others settle into a finer texture. If your Ficus is growing steadily and its compost wets evenly, keeps its structure and dries at a manageable pace, adding bark just to make it look chunkier is unlikely to help. The base may already be doing its job.
Peat and fine coir pith both retain moisture, but they behave differently. Very dry peat can be slow to absorb water again. Coir comes from coconut husks and is sold as fine pith, fibres or chunky chips: pith holds water close to fine roots, whereas chips can make a blend more open.
Some coir is washed to reduce excess salts. Products labelled buffered have also been treated to reduce the risk of nutrient imbalances. Check the packaging for how the coir has been prepared. Compressed coir also needs hydrating before use and a suitable supply of nutrients when used as a growing-medium base.
Some finished products also include a wetting agent to help dried organic material absorb water. If your compost resists water, follow the product's rewetting instructions. Use a horticultural wetting agent only where appropriate; household detergent is unsuitable for potting mixes.
When larger particles help roots get more air
Bark illustrates why particle size matters. Fine, composted bark may already be part of everyday houseplant compost. Medium orchid bark creates more visible spaces around substantial roots. If an established Monstera needs repotting and its old fine compost stays wet too long, a more open blend may be worth trying. Match bark size to the roots: large gaps can leave a small plant with too little damp material touching its finer roots. Bark also softens and settles with time, so the texture will gradually change.
Perlite is expanded volcanic glass. Its low weight makes it useful when you want to add structure without making a hanging pot much heavier. Pumice is heavier and porous, so it may suit a floor-standing plant where extra weight is acceptable; it also holds some water in its pores. Lava rock varies in porosity. If you replace perlite with pumice, expect a heavier mix and check whether water soaks in evenly and how long the compost stays damp.

For the gritty cactus blend below, use washed horticultural grit of a suitable grade. Very fine sand can fill the openings you wanted to keep, so it is not a simple replacement for grit. Choose washed, graded material sold for horticultural use so its size and composition suit potting compost.
When to add ingredients that hold more water
Sphagnum moss can help an open mix retain more moisture without closing all the spaces for air, provided it is placed loosely. Pack it tightly and those spaces shrink; let it dry completely and it may need more careful rewetting. Vermiculite holds more water than perlite in many mixes, which is useful for some cuttings but can also leave a blend wetter for longer. Using vermiculite in place of perlite therefore changes how long the mix stays moist.
Some prepared mixes include wood fibre to keep the texture open and help dried material absorb water again; its effect depends on the whole formulation. Rice hulls can contribute structure. Compost and worm castings may provide nutrients, although their quality and salt content vary. Fired-clay granules, charcoal, biochar and other specialist materials have uses in particular growing setups. For everyday houseplants, a suitable complete compost is often enough.
If you want to substitute an ingredient, ask what it was doing in the original recipe. For example, changing the size of bark pieces adjusts texture; replacing a complete compost base with plain coir also changes the nutrient supply and acidity balance. Raw peat and coir need their own preparation and nutrition plan when used as major ingredients. Start with a modest change and see how the finished mix wets.
Five practical potting mix recipes
Use these five blends as adaptable starting points. Their performance will vary with the plant, pot and growing conditions. Measure parts by the loose volume of prepared ingredients: in a 2:1:1 recipe, for example, use two scoops of the named compost, one of bark and one of perlite. A 1-litre container makes it easy to scale up or down. Hydrate compressed coir before measuring, and use the stated particle grades.
Where a recipe calls for complete prepared compost, use a container-growing product suitable for that plant. Keep the named complete compost as the base: raw coir, peat and garden soil require different preparation. Adding unfertilised bark or mineral material spreads the compost's original starter nutrients through a larger volume, so feeding needs may change later. Follow the growing medium's instructions as the plant establishes, and adjust fertiliser based on its needs.
1. Everyday foliage and moisture-loving plants
Mix: 9 parts complete peat-free houseplant or multipurpose potting compost + 1 part suitably graded, washed horticultural grit.
For calatheas and related prayer plants, around 10% washed horticultural grit is one possible addition to a good prepared compost. It makes a modest change to the texture while the compost continues to hold moisture around fine roots. Start with a base that already wets evenly and stays workable after watering.
This suits some moisture-loving plants when the starting compost needs structure. If it already wets evenly and feels loose, use it unchanged. Plenty of Ficus, Dracaena, palms, spider plants, ferns and begonias grow well in suitable ready-made compost without a separate scoop of grit. Young roots need a finer grade.
2. Climbing tropical plants and other epiphytes
Mix: 2 parts suitable complete peat-free potting compost + 1 part medium orchid bark + 1 part horticultural perlite or appropriately graded pumice.
The bark leaves visible spaces between pieces, while the finer compost still holds moisture around established roots. This is a useful option for a mature climbing Monstera or Philodendron that needs a more open blend at its next repotting. Certain Anthurium can also benefit from that structure.
For commonly grown flamingo-flower Anthurium, this 2:1:1 blend can use ericaceous peat-free compost as its base, formulated for acid-preferring plants. For Hoya, equal parts orchid bark, complete peat-free multipurpose compost and coarse perlite offer another starting option. In both recipes, the complete compost supplies the moisture-holding base and may provide starter nutrients.
Young plants and terrestrial aroids such as Alocasia and Spathiphyllum often do better in a finer medium that keeps moisture close to their roots. If a mature climber begins staying wet much longer in a cooler, dimmer room, check the pot, roots and watering frequency before changing its compost. For more plant-group distinctions, see the aroid substrate guide.
3. Desert cacti and succulents
Mix: 2 parts prepared peat-free loam-based potting compost, such as an appropriate John Innes No. 2-style product, + 1 part washed horticultural grit.
For many common cacti and succulents, the prepared compost holds some moisture, while appropriately sized grit adds weight and coarser particles that help keep the mix from packing tightly. An appropriate ready-made cactus compost is just as reasonable if you do not want to mix your own.
Use a manufactured, container-ready loam-based product. John Innes-style potting compost has a prepared mix of components with nutrient and acidity adjustments; loose garden soil can settle unpredictably in containers. Choose washed horticultural grit of an appropriate size. Very fine sand can fill the small openings in the mix.
For a desert cactus on a bright windowsill, check that water soaks into the compost and see how long it takes to dry afterwards. Some specialist species are grown in much more mineral-rich mixes of pumice or lava rock, although the drying rate still depends on particle size, pot dimensions and watering. Match watering and feeding to the finished medium and the plant.
Forest cacti need a different approach. A Schlumbergera usually appreciates more sustained moisture than an Echeveria, even though both may be grouped with succulents. A loose mix that holds more moisture is a better starting point for forest cacti than assuming this desert-cactus recipe fits them. Sun-loving desert cacti also need plenty of light to grow well and use water steadily.
4. Common epiphytic orchids
Best starting choice: a prepared bark-based orchid medium in a suitable grade, particularly for established Phalaenopsis. To make your own, you can try 3 parts medium orchid bark + 1 part coarse horticultural perlite or suitable pumice. Use this 3:1 blend as one starting option, or choose suitable orchid bark on its own. Choose a bark size that suits your orchid’s roots, then see whether it absorbs water properly and how quickly it dries afterwards.
Water should reach the orchid roots and moisten the bark, while open spaces allow air back between waterings. A small orchid with fine roots may need a different grade from a mature plant with substantial roots, while a mix containing old, broken-down bark may remain wet for longer than it once did.
If the bark dries faster than your setup can comfortably manage, a little loosely placed sphagnum moss can provide more moisture retention. Tight packing is a different matter: it can leave the centre too dense and wet. Check both rewetting and drying before deciding whether to add moss. Terrestrial orchids grow in different conditions and often need a different medium.
Bark supplies little inherent nutrition, so include an appropriate orchid-feeding routine when using bark-based media.
5. Propagation and developing roots
Mix for many non-succulent stem cuttings: 1 part fine, prepared peat-free cuttings or multipurpose compost + 1 part horticultural perlite.
A new cutting has little or no functioning root system, so it needs an airy medium that still makes good contact with the stem and new roots. Moisten this blend evenly and place the cutting in a clean container suited to its size. You should be able to settle the mix around the cutting without leaving large, dry gaps.
For sowing seeds, a finer seed compost is often more suitable, and many succulent cuttings need time for the cut end to dry and seal before planting in a suitable mix. Young plants newly rooted in small nursery cells may need a gradual change in compost and humidity. Vermiculite can be useful for some propagation methods, but it keeps more moisture than perlite in many mixes, so it changes the watering routine.
Once a cutting has well-established roots and needs more room, move it into a suitably sized pot with a mix that suits the plant.
How to prepare and use your potting mix
To make a small amount of compost, gather a clean bucket or tray, a scoop and the prepared ingredients in your recipe. Measure loose material consistently, without packing it into the scoop. Hydrate and fluff compressed coir before measuring.

Get each ingredient ready first. Loosen compost clumps, check that bark and mineral particles match the recipe, and remove excess dust where needed. A little moisture on dry compost and perlite can make mixing easier and reduce airborne dust. Prepare coir according to its product directions: soaking it expands the material, but does not automatically wash out unwanted salts or buffer an unprocessed product.
Turn the ingredients together so bark, minerals and finer compost are distributed evenly. Work in a ventilated place, avoid inhaling dust, follow product handling instructions and wash your hands afterwards. Gloves are helpful with bark and compost. For cuttings, use clean pots and trays with fresh, suitable propagation compost.
Check how the finished mix wets
Fill an empty nursery pot with a little of the blend and water it thoroughly. Let it drain, then gently part the material and check its centre. Has water reached the inside, or has it mostly run down the sides? Does a fine mix remain open enough to handle, or turn into a sticky paste? Does a bark mix seem so coarse that smaller roots would barely touch it? This quick check shows how evenly the material absorbs water and whether the texture holds up after wetting.
Try the mix first on one suitable plant when it already needs repotting. Over the next few waterings, check that the compost absorbs water evenly and notice how long it stays damp before using the recipe more widely. That gives you a useful real-world check while leaving healthy plants undisturbed.
Check the old root ball and the new pot together
Check the existing root ball first. Nursery plants often retain a fine central plug inside coarser outer compost. A firm central plug can be perfectly sound when healthy roots have grown through it and it wets evenly. Leave those roots in place.
The real concern is a centre that repeatedly stays dry while the outer mix is wet, or remains wet long after the outside has dried. If a new blend is placed around an existing root ball, check both during the first few waterings; they may need different amounts of time to absorb and release moisture.
Choose a nursery pot with drainage holes, sized for the current roots and some new growth. Settle the mix gently around the roots and firm it only enough to support the plant. A nursery pot can sit inside a decorative pot, provided you empty water that collects in the outer container. Self-watering and reservoir planters are different systems and need compatible media; the self-watering pot guide covers them.
After potting, match the first watering to the plant and the condition of its roots. For a healthy foliage plant in a draining nursery pot, water thoroughly enough to moisten both the existing root ball and the fresh mix, then let excess water escape. Bark and dried compost may need longer to absorb water than a quick pour allows. Freshly disturbed succulents, unrooted cuttings and plants with damaged or reduced roots need watering matched to their condition. Over the next several waterings, check how the new root zone dries instead of returning to the old schedule automatically. The repotting guide covers root handling and potting technique in more detail.
When a potting mix isn't working: diagnose, improve or replace it
Drooping or yellowing leaves can have several causes. Start by checking the root zone before deciding to repot. Lift the pot to get a sense of its weight, inspect moisture below the surface without tearing through roots, and notice whether water reaches the centre. Remember that the nursery plug can stay wetter or drier than its surrounding compost.
| What you notice | What to investigate | What to try first |
|---|---|---|
| The pot stays heavy and wet | Low light or temperature, excess pot volume, little root growth, compaction or collected water | Empty standing water and reassess watering and conditions before repotting |
| The pot dries unusually fast | Crowded roots, porous terracotta, warm moving air or incomplete wetting | Wet the full root ball and check whether repotting is due |
| Water runs straight through but the centre stays dry | Shrinking, water-repellent material or channels beside the root ball | Rewet carefully and confirm moisture has reached the centre |
| The top dries while the pot remains heavy | Wet lower layers or a dense nursery plug | Check deeper moisture before watering again |
| Leaves wilt or yellow while the mix is moist | Root condition, oxygen, light, pests or nutrition | Check root firmness and growing conditions first |
| White crust, surface growth or small flies appear | Mineral deposits, harmless surface fungi or fungus gnats | Identify which is present, then respond specifically |
When the pot stays wet for too long
Consider a Spathiphyllum that grew well through summer but now sits in cool, dim conditions. Its water use has slowed; the same pot may remain damp for much longer. First empty any standing water, check drainage, assess the pot's size and review how frequently you water. A root system occupying only a small part of an oversized pot is another reason the surrounding mix can stay wet.
Compacted material can restrict air around the roots, and a prolonged oxygen shortage can injure them. Infectious root rot is a separate possibility, which needs further signs before it can be identified. Some healthy roots are naturally dark, so consider whether roots are firm or collapsing, any unusual smell, and the plant's growth and surroundings. If serious root trouble is suspected, the root rot guide provides a more detailed response.
When it dries too quickly—or refuses to get wet
A vigorous plant in bright light can dry its compost quickly, especially in unglazed terracotta where some water also evaporates through the pot walls. If roots have filled the container, a repot into a modestly larger pot may be due. Find out which of these applies before changing the recipe.
A root ball that becomes very dry can be difficult to wet again. You pour water onto the compost, see it rushing from the drainage holes and assume the pot has been watered; meanwhile, the centre may still be dry. Shrunken organic compost can leave channels beside the pot wall. Gradual rewetting, sometimes including bottom watering for a suitable draining pot, may allow the material to absorb water again. Drain the pot afterwards and check that the centre is actually moist. Replace medium that repeatedly hardens, shrinks or resists rewetting. The houseplant watering guide explains watering methods in detail.
When the symptom may not be the substrate
A white crust may come from minerals in water or fertiliser. Its appearance alone cannot tell you whether salt levels are high enough to harm roots. Light fungal growth can appear on damp organic compost even when roots are healthy. Persistently damp compost also favours fungus gnat larvae, although a few adult flies tell you little about moisture deeper in the pot. Identify the problem before deciding what to change; the fungus gnat guide covers that pest.
Pale leaves and poor growth can also involve light, temperature, insects or nutrition. If the compost's acidity or dissolved salts seem to be involved, investigate or seek suitable testing advice before adding lime, acid or fertiliser. Once you know what is causing the problem, choose the change that addresses it.
Keep it, refresh it or replace it?
Replace compost according to its condition and how the plant is growing. Organic ingredients gradually change and may lose air spaces even when the pieces still look intact. How the mix behaves now matters more than its age.
- Keep it when the plant is healthy, water reaches the roots, excess water drains as expected and the medium retains a workable structure. A slightly aged surface or a few roots at a drainage hole do not, by themselves, justify disturbance.
- Refresh it when repotting is needed—for example, when the plant needs a larger pot or the outer compost has deteriorated but the central root ball is healthy. Replace tired loose material around the outside with a compatible fresh mix while preserving sound roots. Simply pushing handfuls of bark, grit or perlite into an occupied pot rarely distributes them where they are needed.
- Replace most or all of it when there is a clear reason, such as severe compaction, persistent water repellency, a fundamentally unsuitable medium or serious root trouble. Remove damaged material carefully and assess the roots; do not wash every healthy root bare as a routine precaution. When disease is suspected, avoid transferring that old material to other susceptible plants.
Sound grit, pumice and similar mineral components can sometimes be cleaned and reused, provided the old mix has no suspected disease or other contamination. Broken-down organic compost is a less dependable main base for a fresh indoor pot. Store unused ingredients as their labels direct and keep them protected from contamination.
A good potting mix absorbs water evenly, lets air reach the roots and dries at a manageable pace. For many houseplants, a reliable prepared compost already does all three. As your plant grows, you can adjust its mix when there is a practical reason to do so.
Selected sources and further reading
- Royal Horticultural Society (RHS), How to grow calatheas — prepared compost and a possible modest grit addition for some prayer plants.
- RHS, How to grow anthuriums and How to grow hoya — examples of structured tropical mixtures.
- RHS, How to grow cacti and succulents — gritty prepared compost formulations.
- RHS, How to grow Phalaenopsis — bark-based media and orchid root care.
- RHS, How to take cuttings from houseplants — propagation compost and perlite.
- RHS, John Innes potting compost — formulated loam-based growing media.
- Durand, Jackson, Fonteno & Michel (2021), The use of wood fiber for reducing risks of hydrophobicity in peat-based substrates, Agronomy — tested rewetting of specific formulations.
- Rowe (2025), Effect of drainage layers on water retention of potting media in containers, PLOS ONE — water retention findings, not a plant-health trial.
- Durand & Michel (2026), Changes in physical properties of growing media constituents according to biodegradation, Frontiers in Horticulture — experimental changes in air-filled porosity.
- Alejandre et al. (2026), Life cycle assessment of growing media: a baseline dataset for European horticulture, Journal of Cleaner Production — environmental comparisons with modelling limitations.





Leave a comment